The Speeder TR and Ventus are both golf shafts made by Fujikura for professional golfers.But they have many differences. So, which one should you buy: the Speeder TR or Ventus?
The designs and characteristics of these golf shafts from Fujikura will be discussed in this article. To determine the ideal golf shaft for your requirements, carefully consider the 10 features’ specific variations.
10 common Differences between Speeder TR vs Ventus shafts
Here is a chart to quickly look through the main difference between the Speeder TR and Ventus.
|R, S, X, XX
|Red, Blue, Black, Green, Yellow, Orange
|Slightly more stable
|More widely available
|Newer shafts, may not be as widely available
|Slightly less forgiving
|Good all-around shaft
|A better choice for professional players
Now, learn the differences between the Speeder TR vs Ventus in more detail depending on various factors.
Wider flexes are available with the Speeder TR. R, S, X, and XX are the four flexes. The flexes range from softest (R) to stiffest (XX).For golfers with a wider variety of swing speeds, the Speeder TR is a superior option.
The flex profile of the Fujikura Ventus is more progressive. Red, Blue, Black, Green, Yellow, and Orange are the six flexes available. The softest and stiffest flexes are red and orange, respectively.
For Fujikura Ventus, the flex transitions from the bottom to the tip more gradually. Golfers who desire a more constant feel throughout their swing may find this helpful.
Use the R flex Speeder TR or the Blue flex Fujikura Ventus if your swing speed is 100 mph. However, if your swing speed is 120 mph, use the Black Flex Fujikura Ventus or the S Flex Speeder TR.
The weight, flex, and tip profile of a shaft affects its launch profile. The launch profile of the Speeder TR is mid-low. This indicates that the ball will be launched with a reasonable amount of height and spin.
The Speeder TR features a thin shaft with a smooth flex and a tip contour that is slightly tapered. A mid-low launch profile is the outcome of this confluence of variables.
The Fujikura Ventus has a mid-launch. This indicates that compared to the Speeder TR, it will launch the ball with a little bit more height and spin.
The Fujikura Ventus is also a lightweight shaft. In contrast to the Speeder TR, it sports a more tapered tip profile. A somewhat higher launch profile is the effect of this.
Golfers who wish to strike the ball far and straight might choose the Speeder TR. Golfers who wish to hit the ball with a bit extra height and spin can choose the Fujikura Ventus.
Low spin describes the Speeder TR.So, it will aid in preventing the ball from rising into the air. Low spin is the effect of the light shaft.
The spin of the Fujikura Ventus is average. As a result, the ball will stay in the air for a longer period.
The Fujikura Ventus has a gentle flex and is also a lightweight shaft. In contrast to the Speeder TR, it sports a more tapered tip profile. There is a moderate spin as a result.
The Speeder TR would probably be preferred by you if you want to strike the ball with less spin. The Fujikura Ventus is perhaps the better option for you if you want to hit the ball with a bit more spin.
Carbon fibers and resins are combined to create the Speeder TR. The Speeder TR feels robust and slick. This indicates that the golfer will receive helpful feedback from it.
The Fujikura Ventus is similarly constructed of carbon fibers and polymers. The Fujikura Ventus is somewhat stiffer than the Fujikura Speeder TR. Golfers who seek additional input from their clubs may find this useful.
The Speeder TR is probably preferred by a golfer who seeks a pleasant, smooth ride. The Fujikura Ventus would be preferred by a golfer who prefers a more responsive feel.
The Speeder TR is a solid shaft. This implies it will aid in preventing the club from twisting throughout the swing.
If a golfer suffersfrom clubhead speed or wantsgreater forgiveness on off-center smashes,they should choose the Fujikura Ventus.
The Fujikura Ventus is also a stable shaft. However, it is significantly more stable than the Speeder TR.A golfer looking for a smooth, pleasant feel would likely like the Speeder TR.
Both the Speeder TR and the Fujikura Ventus are stable shafts. If you are a novice or intermediate golfer, the Speeder TR is a terrific choice. If you are a better player, the Fujikura Ventus is a better pick.
The shaft of the Speeder TR is thin and light. Depending on the flex, the weight varies from 56 grams to 77 grams.
Compared to the Speeder TR, the Fujikura Ventus has a somewhat heavier shaft. Depending on the flex, the weight varies from 58 grams to 106 grams.
Golfers who wish to quicken their swing can consider the Speeder TR. For golfers seeking greater stability and control, the Fujikura Ventus is an excellent option.
The Fujikura Ventus is more expensive than the Speeder TR shaft. Depending on the flex and length, the cost is in the $200–300 range.
A more expensive shaft made for better players, the Fujikura Ventus. The cost is between $300 and $400. On their website, it is stated that the cost is $350.
The Speeder TR is a shaft with good value. For skilled players, the Fujikura Ventus shaft performs better but costs more money.
The Fujikura Ventus is less common than the Speeder TR. The majority of the big golf merchants have these shafts in their collections.
As a more recent shaft, the Fujikura Ventus might not be as commonly accessible as the Speeder TR. However, as more golfers show interest in it, it is becoming more readily accessible.
Depending on the location, the Speeder TR and Fujikura Ventus may not be readily available. The Speeder TR could be more generally accessible than the Fujikura Ventus in some areas.
The Fujikura Ventus could be more accessible than the Speeder TR in other areas.
The Speeder TR has a great amount of forgiveness. This indicates that it will contribute to minimizing the distance lost from off-center impacts.
The Fujikura Ventus is a forgiving shaft as well. It is a little less forgiving than the Speeder TR, though.
The Fujikura Ventus and the Speeder TR are both forgiving shafts. For golfers who have trouble with accuracy, the Speeder TR is a better option since it is a little more forgiving.
10. Overall Performance:
The Speeder TR is an excellent shaft. It combines remoteness, forgivingness, and feeling. It features a thin shaft with a smooth flex and a tip contour that is slightly tapered.
The Speeder TR is constructed from a mix of polymers. A shaft that gives a good mix of distance, forgiveness, and feeling is the result of these components coming together.
The Fujikura Ventus is known for its gentle flex. In contrast to the Speeder TR, it sports a more tapered tip profile. It is constructed with a brand-new material called VeloCore.
The material VeloCore is developed to increase the performance and stability of the shaft. Due to the interaction of these characteristics, the shaft outperforms the Speeder TR in terms of distance, spin, and control.
Flex, weight, tip profile, material, and construction all affect a shaft’s overall performance.
The Ventus may be preferred by a golfer searching for a shaft that provides the finest potential performance. For golfers seeking a more reasonably priced shaft with decent performance, the Speeder TR is a fantastic choice.
FAQ about Speeder TR vs Ventus golf shafts
1. How much do the different models of Speeder TR weigh in grams?
TR 569S: 56g, TR 569S: 58g, TR 661S: 66g, TR 661X: 68g, TR 757S: 75g, TR 757X: 77g.
2. How much torque does the Fujikura Speeder TR generate?
TR569: 4.5, TR661: 3.5, TR 757: 3.0.
3. What is the tip flex of the Fujikura Ventus golf shafts?
The tip flex lies between 77 to 120 depending on the model.
4. How much torque does the Fujikura Ventus generate?
The torque is between 2.8 to 4.0.
5. What is the bend point of the Fujikura Ventus?
The bend point may be low, medium, or high depending on the model.